INTRODUCTION:

It is designed to polish capsules and tablets as well as to eliminate static electricity. 
It can automatically reject low weight capsule; loose piece and fragments of capsules.
It can be adapted to any types of capsule filling machines and tablet machines.

FEATURES:

• The height and angle can be adjusted to adapt any kin of production machine. 

• It can automatically reject low weight capsule; loose piece and fragments of capsules.

•  The new type net cylinder ensures no jammed capsules while working.

• The capsules are not directly contact the metal net to protect the printing logo effectively.

• The imported brush is easy to change and durable.

• The whole design aims at quick maintenance and easy cleaning.

• The three phase motor is controlled by frequency converter which has high moment and is suitable for continue working.

Technical Parameters

Type	C&C100	C&C100A
Capacity	150000pcs/h	300000pcs/h
Power	~220V 50Hz 1A ~110V 60Hz 2A	~220V 50Hz 1A ~110V 60Hz 2A
Dimension	950x600x1000mm	1150x600x1000mm
Weight	35kg	40kg
Vacuum	2.7m3/min ?.014Mpa	2.7m3/min ?.014Mpa
Compressed air	0.25m3/min 0.3MPa	0.25m3/min 0.3MPa

                              

WORKING PRINCIPLE:

• From the capsule filling the filed capsules are fed into A. 

• The turning brush bings capsules from B to C the cylinder.

• Within the net cylinder brush D polishes and dedusts the capsules. The loose piece and fragments are retrieved by vacuum sucker E. 

• The brush conveys the capsules to the outlet of cylinder F.

• In the sorter segment G clean compressed air collects low weight capsule, loose piece and fragments of capsules to H the collecter.

• The pressure of the compressed air is shown on the filter decompressed valve meter which can be adjusted at different requirement.

• The qualified capsules are ejected from outlet J.