|
|
SCOPE OF APPLICATION:
Pressure: 0-1.0mpa
Temperature:-20-200℃
Shaft: 40-140mm
Rotational speed: <2m/s
High-speed, high resistance to corrosion type mechanical; the specially designed gland
ring is sure not to contaminate your materials.
|
SPECIFICATION:
1. The agitating shaft of enamel glass shall be of finish grinding to the minimal
roughness of , and tolerance of h8.
2. The radial vibration of the agitating shaft(or shaft sleeve) at the sealing place shall
be less than 0.5mm.
3. The maximum axial displacement: 0.5mm.
4. The dual-end seal shall be used when the medium is poisonous, inflammable and
explosive.
5.Unfasten the seal #10 piece 2mm after installation; and ready for test run.
6. The rotating speed can be 1800 rpm, maximum application pressure 0.6Mpa when the seal
piece suits the steel reaction cauldron.
|
|
 
|
TABLE OF DIMENSIONS (HG/T 2057-91)
Model |
D |
D |
D1 |
D2 |
H |
H1 |
N-Φ |
FMY-212-1-40 |
40 |
160 |
130 |
100 |
180 |
84 |
4-Φ18 |
FMY-212-1-50 |
50 |
190 |
150 |
120 |
180 |
84 |
4-Φ18 |
FMY-212-1-65 |
65 |
210 |
170 |
140 |
180 |
84 |
4-Φ18 |
FMY-212-1-80 |
80 |
240 |
200 |
170 |
180 |
84 |
8-Φ18 |
FMY-212-1-95 |
95 |
265 |
225 |
195 |
180 |
84 |
8-Φ18 |
FMY-212-1-110 |
110 |
320 |
280 |
250 |
180 |
84 |
8-Φ18 |
FMY-212-1-125 |
125 |
320 |
280 |
250 |
180 |
84 |
8-Φ18 |
FMY-212-1-140 |
140 |
375 |
335 |
330 |
180 |
84 |
12-Φ18 |
|
PARTS LIST
20 |
Washer |
F4 |
1 |
|
19 |
Fastening Screw |
1Cr18Ni9Ti |
3 |
|
18 |
Bushing |
Stuffing F4 Assembly |
1 |
|
17 |
Driving Pin |
45 |
2 |
|
16 |
Dust Cover |
Organic Glass |
1 |
|
15 |
Drive Seating |
1Cr18Ni9Ti |
1 |
|
14 |
Rotating O Ring |
Fluorubber |
1 |
Selected by customer to his needs |
13 |
Rotating O Ring |
Silicon Carbide |
1 |
|
12 |
Dead Ring |
Impregnated Flurane Graphite |
1 |
|
11 |
Shaft Sleeve |
Silicon Carbide |
1 |
Or Silicon Nitride |
10 |
Anti-Rotating Screw |
1Cr18Ni9Ti |
1 |
|
9 |
Dead O Ring |
Fluorubber |
1 |
Selected by customer to his needs |
8 |
Throw-out ring |
1Cr18Ni9Ti |
1 |
|
7 |
Spring |
1Cr18Ni9Ti |
1 group |
|
6 |
Oil Tray |
A3 |
1 |
|
5 |
Gland |
Glass Fibre F4 |
1 |
|
4.2 |
Nut |
Glass 5 |
1 group |
|
4.1 |
Gasket |
Glass A |
1 group |
|
4 |
Bolt |
Glass4.8 |
1 group |
|
3 |
Mid Stuffing |
Glass Fibre F4 |
1 |
|
2 |
Water Nozzle |
A3 |
2 |
|
1 |
Chilling water Tank |
A3 Enamel Glass |
1 |
|
No. |
Description |
Material |
Quantity |
Remarks |
|
|
|