| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Applications:
Series KGF Micro-Computer Controlled Screw Bolt Type
Separate Filler is a special device used for separate quantitative
of powders and agents in the pharmaceutical trade.
This machine adopts 8031 stempmotor controlled by single chip
computer to drive the separate filling screw bolt.The setting
of filling quantity is inputted by the computer keyboard.It features
adjustable filling quantity without stopping machine,failure to
fill with powder filling port as well as display of fault indicator.This
machine is also applying a bottle feeding mechanism with dividing
plate which features simple and safe in construction,wide range
of adjusting dosage,less errors of filling quantity,high output
and applicable to quantitative filling of different powders and
agents.The 100 stage laminar purifying device can be provided
accord to requirements of clients.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operation
|
|
|
|
|
|
|
|
|
|
|
|
|
The
system can directly drive stepmotor with 45mm-130mm diameter,the
machine adopts MCS-51 single chip microcomputer as main controller,applying
constant driving power supply with the design of switch GTR cut-off
filter circuit along with flexible keyboard operating method.
It features flexible and convenient operation,automatic memory of
correcting data ,machine stoppage and power cut-off without losing
effcient power supply harnessing rate .stronger starting torque
of motor as well as high speed operation etc;under orientation working
method,the power consumption may be reduced to about 25% of the
normal value |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Operating
procedure |
|
|
|
|
|
|
|
|
|
|
|
The
separate filler is composed of frame,mechanical-driver system,bottle
and out-feeding mechanisms and micro-computer control system etc.
1.Inlet bottle mechanism consists of inlet bottle disk and transmisson
chain etc, the scattered bottles are transmitted via inlet bottle
mechanism to disks for separate filling.
2.The separate filling head is the key part of the machine consisted
of computer control system,stepmotor,bolt,funnel,mixer and automatic
controller to protect from conforming with GMP sanitary requirements
and equipped with screw feeding bucket with powder supply belt speed
may be adjusted steplessly making the powder position keep intact
to ensure the filling presicion.The setting and correction of filling
volume is input by computer key board featuring filling volume adjustable
without stopping the machine.
3.The machine is equipped with electronic automatic monitoring device
to prevent the metallic chips from immediately stopped when there
are foreign matters in the powder or when the bolt suffers friction
with the bucket,the machine can stop automatically with red light
displaying malfunction. |
|
|
|
|
|
|
|
|
|
|
|
Major
Technical Parameters |
|
|
|
|
|
|
|
|
|
|
1.Specifications
of applicable bottles:2-25ml
2.Screw bolt quantity:2
3.Productive capacity:40-120 bottle/min
4.Filling volume range:0.1-2.5g
5.Filling volume error:=<±5%
6.Vacuum degree:20m³
7.Air-bleed speed:20m³
8.Power consumption:1KW
9.Voltage:220V(conversion speed adjustment);
380(non-conversion
speed adjustment)
10.Weight:600kg
11.Overall size: 1600*1000*1750mm(L*W*H)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
.jpg)