| |
|
| |
|
|
|
|
|
|
|
| Working
Principle: |
|
|
|
Its motor is controlled by frequency speed controller and it move
the drum through driving system to spin round the main axis to form
centrifugal field of force. The liquid material enter into the separating
area directly from one side of the drum. Under affection of centrifugal
field of force, the liquid material is thrown towards the wall of
the drum, then the liquid enter into machine shell through filter
cloth and the hole of the wall and fall down on the bottom of machine
to discharge through outlet hole. The solid phase left in the filter
cloth. The thickness of material is controlled by a special detector
of material location. Water is poured through the washing tube to
wash the material. After dewartering, the drum slow down and the
solid phase is scrapped away by scraper then discharge through the
outlet located in the drum. The parts of the machine touched with
material is used stainless steel, carbon steel, titanium allow and
etc. |
|
|
|
Main Purposes |
|
|
|
|
|
It is used to filter
suspension which solid phase is aprtical especially suitable
for the poisonous, inflammable, explosive, corrosive material
and working environment. Well not for textile with long fabric
and others that not easy to scrap.
|
|
Technical
Parameter: |
|
|
|
|
| Type |
SGZ1000-NA |
SGZ1250-NA |
|
Bowl |
Inner
Diameter mm |
1000 |
1250 |
|
Height
mm |
420 |
630 |
|
Fillter
Area m2 |
1.3 |
2.45 |
|
Diameter
of Liquid Baffle Port mm |
760 |
870 |
|
Max
Volume L |
140 |
420 |
|
Max
Charge kg |
220 |
500 |
|
Speed
r/min |
1200 |
1000 |
|
Separation Factors |
800 |
700 |
|
Scraping
Speed r/min |
<100 |
<100 |
|
Discharging Mode |
Hydraulic
Scraper |
Hydraulic Scraper |
|
Air
Scraper |
Air Scraper(0.3~0.6MPa) |
|
Manual Scraper |
Manual Scraper |
|
Braking Mode |
Motor Brake |
Motor Brake |
|
Main
Motor |
Type |
YB180L-6B5 |
YB200L-6V1 |
|
Speed
r/min |
1000 |
970 |
|
Power
kW |
15 |
1 |
|
Motor
of Oil Pump |
Type |
YB90L-4 |
YB90L-4 |
|
Speed
r/min |
1500 |
1500 |
|
Power
kw |
1.5 |
1.5 |
|
Pressure
kg f/cm2 |
10-15 |
8-12 |
|
Dimenstion
mm |
2150X1700X1600 |
2700X1860X3000 |
|
Weight
T |
3.5 |
4.5 |
|
|
Features |
|
|
|
|
|
|
|
1) The drum of main machine is controlled by frequency speed
controller
2) Non-explosion protection for the whole machine. The main
machine is adopted full-closed filling nitrogen gas system,
on-the-spot operating cabinet and hydraulic station is safe
and flame-proof, which is special suitable for inflammable,
explosive and corrosive the working environment and material
with .
3) When feeding, the location of material is monitored by radio
frequency admittance sensor produced in America without the
possibility of overloading.
4) PLC anto control, with DCS nipple, the whole operating processes
of centrifuge can be controlled automatically.
|
|
Attached
Drawings |
|
|
|
|
|
|
1)
The Structure Diagram
2) Working Process Drawing
|
 |
|
|
|
|
|
|
|
|
