Technical Blog | LPMIE
LPMIE Official Blog - Explore more!
By Crystal Li | 18 June 2026 | 0 Comments

Glass-Lined Reactor Agitator Design Standards and Sizing Principles

Glass-Lined Agitator Dimensions and Selection Guide for Chemical Reactors

In glass-lined reactor systems, the agitator plays a critical role in mixing efficiency, heat transfer, reaction uniformity, and overall equipment reliability. Selecting the correct agitator size and shaft configuration is essential for achieving stable operation while protecting the glass-lined surface from mechanical damage.

This guide outlines the most common glass-lined agitator types, sizing principles, and shaft selection considerations used in chemical, pharmaceutical, and specialty materials processing.

Common Agitator Types and Applications

Agitator Type

Typical Speed Range

Recommended Viscosity

Main Application

Anchor Agitator

63–85 rpm

1,000–10,000 mPa·s

Medium-viscosity mixing and heat transfer

Frame Agitator

35–65 rpm

5,000–50,000 mPa·s

High-viscosity products and suspension systems

Paddle Agitator

80–130 rpm

Below 1,000 mPa·s

General liquid blending

Propeller Agitator

150–300 rpm

Below 500 mPa·s

Fast circulation and solid suspension

Turbine Agitator

200–350 rpm

Low to medium viscosity

Gas dispersion, oxidation, and emulsification

Typical Shaft Size Reference

The agitator shaft diameter generally increases with reactor volume to ensure sufficient mechanical strength and torque transmission.

Reactor Volume

Reactor Diameter

Typical Shaft Diameter

50–100 L

500–600 mm

40 mm

200–500 L

700–900 mm

50–65 mm

1,000–2,000 L

1,100–1,300 mm

80–95 mm

3,000–5,000 L

1,600–1,750 mm

110–125 mm

10,000–20,000 L

2,100–2,600 mm

140–160 mm

Key Design Considerations

Agitator-to-Vessel Clearance

For anchor and frame agitators, a small clearance is typically maintained between the agitator and vessel wall to maximize mixing efficiency while preventing contact with the glass-lined surface.

Impeller Diameter Selection

Paddle, propeller, and turbine agitators are generally designed with an impeller diameter equal to approximately one-third to one-half of the vessel diameter, depending on process requirements.

Shaft Connection Options

Several shaft connection designs are commonly used:

l Tapered threaded shaft ends for traditional drive systems

l Clamp coupling connections for easier maintenance

l Flange-mounted shafts for high-torque applications

l Straight keyed shafts for compact drive assemblies

The final selection depends on reactor size, operating torque, maintenance requirements, and drive system design.

Choosing the Right Glass-Lined Agitator

Selecting the proper agitator involves more than matching reactor volume. Process viscosity, mixing objectives, heat transfer requirements, rotational speed, and shaft loading must all be considered together.

For low-viscosity liquid blending, propeller and paddle agitators often provide the best efficiency. For highly viscous products, anchor and frame agitators deliver superior mixing performance. Processes involving gas-liquid reactions, emulsification, or dispersion typically benefit from turbine-style agitators.

A properly sized agitator not only improves process efficiency but also helps extend the service life of the glass-lined reactor and drive system.
- Contact us today for more information.

Leave a Reply

Your email address will not be published.Required fields are marked. *
Name
E-mail
Content
Verification code
ver_code
POPULAR BLOG